TWISTLOCK

There is no requirement to remove the AHK3-rf from the GTFO-WRIST-STRAP® to open handcuffs.

Simply remove the wrist-strap from your wrist, pull the cord into the channel of the ahk3-rf and then insert into the key-way.

If you want to remove the key you will require tools. Insert a piece of metal (R-Clip, hair-grip etc.) into the two holes of the AHK3-rf and then use needle nose pliers to rotate the TWISTLOCK to the open position.

Gone!

The last 4 remaining B-2 PROBE by STLTH BLACK® sold today. There are 125 out there somewhere “¯\_(ツ)_/¯

TEP25/1

TEP25/1 is a train-and-equip program that has been developed to provide the capability and capacity to deliver expedited training, services and equipment in a short time-frame to governmental, diplomatic, law enforcement, intelligence, special operations personnel and select clients that are prone to abduction, kidnap, restraint and detention, during conditions of armed conflict, civil unrest or operations other than war.

This TEP25/1 equipment pack contains the following items:

  • LEECH (Low-profile Escape Evasion Cache Hide) x 1
  • SPOOKKNOP x 1
  • Hair-Clip x 1
  • Hair-Grip x 1
  • High Tensile Black Safety Pin x 1 (used to feed the friction saw between the wrist and restraint)
  • P425 8-carrier diamond braid para-aramid cord (425 LB tensile strength) x 1 (requires some assembly)
  • White 5mm 3V LED x 1 (works with a 3v CR2032 Coin Battery Cell, not included due to postage restrictions)
  • GTFO-Wrist-Strap® 2.0

Get now via the PayPal link for £12.50 GBP with Free delivery anywhere, worldwide…

https://py.pl/p0FS5

or via Ghost Ship Exports® – Etsy…

https://www.etsy.com/uk/listing/1821700248/tep251-equipment-pack

Special Edition

STLTH BLACK® Development Group facilitates the development of future products or the improvement of current products.

The majority of products will never see the light of day, but there are rare exceptions…

STLTH BLACK® Special Edition GTFO-Wrist-Strap® 2.0

  • STLTH BLACK® Ballistic-Striker-Bead®
  • STLTH BLACK® AHK3-rf
  • STLTH BLACK® Twistlock
  • STLTH BLACK® Split-Ring

www.stlth.black

FENDCUFF®

FENDCUFF® is supplied as a complete nylon restraint system:

1 x Rigid Connector
1 x Integrated Kinetic Holster (Spare Rigid Connector)
1 x Hook & Loop Wrap Strap
2 x Nylon Disposable Cable-Ties

 There are now two versions of FENDCUFF® Rigid Connector available:

v1.0 for 9mm and 10mm cable-ties
v2.0 for 9mm, 10mm and 12.6mm cable-ties

Both versions of Rigid Connector will work with the key operated reusable nylon restraints.

On request, FENDCUFF® can be supplied locked and loaded, with the nylon restraints in the double-loop configuration and installed inside the integrated kinetic holster.

The FENDCUFF® can be installed on any 2 inch duty belt in seconds and it also works with MOLLE/PALS.

The FENDCUFF® complete nylon restraint system is always ready for rapid deployment. Simply pull on the connector to extract the nylon restraint from the integrated holster.

If required the integrated holster can be used as another connector for nylon restraints, just add two cable-ties and you’re good to go!

www.fendcuff.com

H-BLOCK

FASTCUFF® H-BLOCK is the result of extensive research and development by a former police officer and a precision engineer, to design and manufacture a cost-effective reusable nylon restraint to meet the demands of law enforcement professionals worldwide.

www.fastcuff.com